If you’ve recently installed a new heat pump for your heating needs, you’ve made an excellent choice. But in order to keep your heat pump running for years to come, we’d also like to inform you about some urgent repair issues to keep an eye (and ear) out for.
The issues we describe here are ones that you won’t want to neglect. If you experience any of the following, turn off the unit immediately to prevent any more damage. Speaking with an expert can help you confirm the issue and they’ll tell you how to proceed.
Heat pumps don’t use a heat exchanger to create warm air. Rather than “create” warmth, they transfer it from the outside and into your home. To explain it in the simplest terms, heat pumps “recycle” warm air.
It’s able to do so thanks to refrigerant, a blend of chemicals that facilitate heat transference. This refrigerant is contained in tubing that runs through the heat pump’s condenser coil, evaporator coil, and the length of tubing connecting the two.
Leaks can develop in the refrigerant line, and that can lead to a range of symptoms:
- Lack of heating or cooling power.
- Lack of airflow, in the event that the evaporator coil has frozen over.
- Increase in the energy bill.
- Damage to the compressor.
Your heat pump will naturally turn on and off through its normal operations. But it shouldn’t be turning on and off rapidly, such as several times within the span of minutes. That’s how you know you have a short-cycling issue.
It will take significantly longer to heat the home if your heater is short-cycling, and that leads to excessive stress put on the system as well as more energy expended.
Short-cycling can be caused by something as simple as a clogged air filter. Or, it could be as complex as needing to replace your heater entirely. We suggest calling up an expert in heating in Anaheim, CA to have them take a look before making any big decisions. Either way, you shouldn’t run the heater until you get the problem settled.
There’s no time where odd noises coming from your heater is going to be a good thing. Rather, what you want to find out is if the noise can be easily fixed. If not, then it’s almost always going to be the sign of an issue that needs immediate attention.
An excessively loud heat pump might just be going through a defrost cycle, which is a normal function. They also might make louder noises when starting up or shutting down.
The noises to be concerned about are the ones like metal striking metal, screeching, grinding, rattling, and other irritating noises. Issues can range from dirty motor bearings to broken belts and low refrigerant levels.
It’s difficult to tell what your issue might be without hearing the noise for ourselves, so we suggest getting an expert’s opinion over the phone.